Axus Decor Razor-LT Ultra Low Tack Tape - 48mm x 40m

A very low tack masking tape that offers extended protection of delicate surfaces for up to 90 days, leaving incredibly clean, straight lines on removal.

• Ultra low tack masking tape
• Suitable for masking off recently painted surfaces and wallpaper
• Leaves clean, straight lines without paint bleed
• Can be left on for up to 90 days, leaving no residue on removal
• Pink colour is easy to spot and remove on completion of a project
• Suitable for interior use only

Usage Guide:

Before Application:

1. Ensure that the surface you intend to tape is clean, dry, and free from dust, dirt, oil, or any other contaminants.
2. Avoid applying the masking tape to surfaces with loose paint.

Application:

1. Start by gently unrolling the masking tape from the roll, being careful not to stretch or tear it.
2. Apply the tape smoothly and firmly onto the surface, ensuring that it adheres completely and evenly.
3. Use a smoothing tool or your fingers to press down the edges of the tape firmly to prevent paint bleed.
4. Apply paint, taking care not to overload the tape with excessive paint.

Removal:

1. Allow the paint to dry before removing the masking tape.
2. When removing the tape, do so slowly and carefully at a 45-degree angle to the surface.
3. Due to the extra low tack nature of this tape, it may be necessary to peel it back with extra care to prevent tearing or paint damage.
4. If any resistance is felt during removal, stop and use a utility knife to carefully score along the edge of the tape to prevent damage to the painted surface.
5. Dispose of the used masking tape responsibly.

Storage:

1. Store the masking tape in a cool, dry place away from direct sunlight and extreme temperatures.
2. Avoid storing the tape in humid or damp conditions as this may affect its adhesive properties.

Important Notes:

1. This masking tape is formulated with an ultra low tack adhesive specifically for use on recently painted surfaces. Always test a small inconspicuous area first to ensure compatibility and adhesion.
2. While our masking tape is designed to be left on for up to 90 days, humidity, temperature, and the type of paint used could potentially reduce the optimal duration. Therefore, it's advisable to check the condition of the tape periodically and remove it promptly if any signs of adhesive residue or difficulty in removal are observed. 
3. This masking tape has a temperature rating of up to 100 degrees Celsius. Avoid exposing it to temperatures exceeding this limit as it may affect its performance.
4. In the unlikely event of adhesive residue remaining on the surface after removal, gently wipe it away with a clean, damp cloth or use an appropriate adhesive remover.

Disclaimer:

Our masking tape is manufactured to the highest standards and undergoes rigorous testing to ensure quality and reliability. The information and recommendations provided here are based on our practical experience and expertise. However, we cannot provide any express or implied warranties, including but not limited to merchantability or fitness for a particular purpose. It is the user's responsibility to determine whether our masking tape is suitable for their intended application and method of use. If you have any doubts or questions about the suitability of our product for your specific needs, please contact us before use.  We strive to provide accurate and helpful information to our customers, but ultimately, the user assumes all risks associated with the use of our masking tape.